Nanomaterials For Manufacturing of Functional Prototypes By Additive Manufacturing: A State of The Art Review And Future Research Prospective

Ranvijay Kumar

doi:https://doi.org/10.14445/22315381/IJETT-V69I1P216

Research Article | Open Access | Download PDF

Volume 69 | Issue 1 | Year 2021 | Article Id. IJETT-V69I1P216 | DOI : https://doi.org/10.14445/22315381/IJETT-V69I1P216

Nanomaterials For Manufacturing of Functional Prototypes By Additive Manufacturing: A State of The Art Review And Future Research Prospective

Ranvijay Kumar

Citation :

Ranvijay Kumar, "Nanomaterials For Manufacturing of Functional Prototypes By Additive Manufacturing: A State of The Art Review And Future Research Prospective," International Journal of Engineering Trends and Technology (IJETT), vol. 69, no. 1, pp. 104-110, 2021. Crossref, https://doi.org/10.14445/22315381/IJETT-V69I1P216

Abstract

Additive manufacturing has considered as one of the advanced manufacturing processes for the manufacturing of highly sustainable functional prototypes. The previous studies have been reported to manufacture different polymers, metals, alloys, and composite materials, which have been shown a wide range of applicability. Also, the use of conventional materials and processes restrict the broad applicability. Nanomaterials are the class of engineering materials that can provide functionality in the products manufactured by additive manufacturing. The previous studies have reported nanomaterials for the manufacturing of sustainable products with a range of functionalities, e.g., sensing abilities, high mechanical performance, toughness, melting behavior, etc. The present study is a state of the art review for nanomaterials in the additive manufacturing process for future applications.

Keywords

Additive Manufacturing, Nanomaterials, Fillers, Fused Filament Fabrication, Sensor Materials, Functional Prototypes, Innovation

References

[1] T. A. Campbell and O. S. Ivanova.,3D printing of multifunctional nanocomposites.,Nano Today, 8(2)(2013) 119–120. doi: 10.1016/j.nantod.2012.12.002.
[2] Y. L. Kong, M. K. Gupta, B. N. Johnson, and M. C. McAlpine.,3D printed bionic nanodevices., Nano Today, 11(3)(2016) 330–350. doi: 10.1016/j.nantod.2016.04.007.
[3] C. W. Peak, K. A. Singh, M. Adlouni, J. Chen, and A. K. Gaharwar.,Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration., Adv. Healthc. Mater.,8(11)(2019). doi: 10.1002/adhm.201801553.
[4] M. K. Gupta et al., Parametric optimization and process capability analysis for machining nickel-based superalloy., Int. J. Adv. Manuf. Technol., 102(2019) 9–12,3995–4009. doi: 10.1007/s00170-019-03453-3.
[5] S. Hales et al.,3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices, Nanotechnology, 31(17)(2020), doi: 10.1088/1361-6528/ab5f29.
[6] J. T. Sehrt, S. Kleszczynski, and C. Notthoff., Nanoparticle improved metal materials for additive manufacturing., Prog. Addit. Manuf., 2(4)(2017) 179–191, doi: 10.1007/s40964-017-0028-9.
[7] S. Kumar, M. Kumar, and A. Handa Combating hot corrosion of boiler tubes - A study,” Eng. Fail. Anal., 94(2018) 379–395. doi: 10.1016/j.engfailanal.2018.08.004.
[8] C. Zhu et al., Colloidal materials for 3D printing, Annu. Rev. Chem. Biomol. Eng., 10(2019) 17–42, doi: 10.1146/annurev-chembioeng-060718-030133.
[9] P. Gairola, S. P. Gairola, V. Kumar, K. Singh, and S. K. Dhawan, “Barium ferrite and graphite integrated with polyaniline as an effective shield against electromagnetic interference, Synth. Met., 221(2016) 326–331 doi: 10.1016/j.synthmet.2016.09.023.
[10] K. Nau and S. G. Scholz, Safe by design in 3D printing, Smart Innov. Syst. Technol., 155(2019) 341–350 doi: 10.1007/978-981-13-9271-9_28.
[11] Lalita, A. P. Singh, and R. K. Sharma, Synthesis and characterization of graft copolymers of chitosan with NIPAM and binary monomers for removal of Cr(VI), Cu(II), and Fe(II). metal ions from aqueous solutions, Int. J. Biol. Macromol., 99(2017) 409–426.doi: 10.1016/j.ijbiomac.2017.02.091.
[12] C. Chen et al., Additive Manufacturing of Piezoelectric Materials, Adv. Funct. Mater., 30 (52)(2020), doi: 10.1002/adfm.202005141.
[13] N. Makul, Advanced smart concrete - A review of current progress, benefits, and challenges, J. Clean. Prod., 274(2020), doi: 10.1016/j.jclepro.2020.122899.
[14] S. L. De Armentia, J. C. Del Real, E. Paz, and N. Dunne, Advances in biodegradable 3D printed scaffolds with carbon-based nanomaterials for bone regeneration, Materials (Basel)., 13(22)(2020) 1–49, 2020, doi: 10.3390/ma13225083.